Advertisement
Quick Links
SINGLE & DOUBLE TREADLE WITH A SLIDING HOOK FLYER
Ashford Handicrafts Limited
Factory and Showroom: 415 West Street
PO Box 474, Ashburton 7700 New Zealand
Telephone 64 3 308 9087 Facsimile 64 3 308 8664
Email: sales@ashford.co.nz Internet: www.ashford.co.nz
INSTRUCTIONS
JOY 2 SPINNING WHEEL
Ashford Guarantee
Thank you for purchasing this Ashford product. In the unlikely event there is
any fault in manufacture we will replace the item. To validate our guarantee
please visit our website or write to us.
JASW110618V8
Advertisement
Related Manuals for Ashford JOY 2
Summary of Contents for Ashford JOY 2
- Page 1 Ashford Guarantee Factory and Showroom: 415 West Street Thank you for purchasing this Ashford product. In the unlikely event there is PO Box 474, Ashburton 7700 New Zealand any fault in manufacture we will replace the item. To validate our guarantee Telephone 64 3 308 9087 Facsimile 64 3 308 8664 please visit our website or write to us.
- Page 2 ASSEMBLY INSTRUCTIONS FOR JOY 2 SPINNING WHEEL SINGLE & DOUBLE TREADLE WITH A SLIDING HOOK FLYER Your Joy 2 spinning wheel has been lacquered prior to assembly. If desired, the application of Ashford Wax Finish may further enhance its appearance.
- Page 3 Apply a drop of oil to the flyer spindle and slide the bobbin on. Ashford spinning oil is ideal for this purpose. Thread the flyer spindle into the top shaft. Hold the flyer...
- Page 4 When plying or spinning bring the bobbins forward. Push them back before folding the treadle up. To make spinning easier apply a drop of Ashford Spinning Wheel Oil to the flyer, bobbin and conrod bearings. Note: The ball...
- Page 5 Ratio Position the stretchy drive cord around the smallest 14:1 11:1 grove in the wheel and then over the largest flyer whorl. This gives a flyer to wheel ratio of 6:1. The other ratios are 8, 11 & 14:1. When changing ratios ensure the drive cord directly aligns the wheel and flyer whorl.
- Page 6 Step 3 Sit in a comfortable position. A straight back Ashford Spinning Chair is ideal. On the single treadle Joy 2, treadle with either foot or both together. Step 4 The wheel is weighted so the crank will always come to rest in the 1 o’clock position.
-
Page 7: Maintenance
Ashford Handicrafts Limited Factory and Showroom: 415 West Street PO Box 474, Ashburton 7700 New Zealand Telephone 64 3 308 9087 Facsimile 64 3 308 8664 Email: sales@ashford.co.nz Internet: www.ashford.co.nz...