Advertisement
This wheel can be used either
double drive or single drive.
When spinning double drive
the brake band is stored
around the back of the maid
upright with the drive band
around both the large flyer
pulley and small bobbin pulley.
When spinning single drive the
drive band is around the large
flyer pulley and the brake band
is over either bobbin pulley.
When using the brake band
take care not to over-stretch
the springs.
Tie the threading hook to the
front maid upright with the
cotton tape.
Attach the flyer unit to the side
rails with 2 screws and washers,
do not tighten yet.
Move the flyer unit until the
wheel and large flyer pulley are
aligned. Then tighten the screws.
15
15
Advertisement
