GE NETWORX Series Installation And Start-Up Manual page 31

LOCATION 74 - EXPANDER TROUBLE / EXPANDER TROUBLE RESTORE COMMUNICATOR CODES (4
segments, numerical data)
Location 74 contains the digits for a 4+2 format that will be sent if "Expander Trouble Reporting" is enabled.
Segments 1 & 2 contain the digits of the "Expander Trouble Reporting". Segments 3 & 4 contain the digits of the
"Expander Trouble Restore". Refer to the box on page 27.
LOCATION 75 - FAIL TO COMMUNICATE COMMUNICATOR CODE (2 segments, numerical data)
Location 75 contains the digits for a 4+2 format that will be sent if the "Fail To Communicate Reporting" is enabled.
Refer to the box on page 27.
LOCATION 76 - LOG FULL COMMUNICATOR CODE (2 segments, numerical data)
Location 76 contains the digits for a 4+2 format if the "Log Full Reporting" is enabled. Refer to the box on page 27.
LOCATION 77 - OPENING COMMUNICATOR CODE (8 segments, numerical data)
Location 77 contains the digit of a 4+2 format if the "Opening Reporting" is enabled. Refer to the box on page 27.
Segment 1 = Partition 1
Segment 2 = Partition 2
LOCATION 78 - CLOSING COMMUNICATOR CODE (8 segments, numerical data)
Location 78 contains the digit of a 4+2 format if the "Closing Reporting" is enabled. Refer to the box on page 27.
Segment 1 = Partition 1
Segment 2 = Partition 2
LOCATION 79 - AUTOTEST COMMUNICATOR CODE (2 segments, numerical data)
Location 79 contains the digits for a 4+2 format that will be sent if the "Autotest" or "Manual Test" is enabled. Refer to
the box on page 27.
LOCATION 80 - RECENT CLOSING AND EXIT ERROR COMMUNICATOR CODE (2 segments, numerical data)
Location 80 contains the digits for a 4+2 format that will be sent if "Recent Closing" and/or "Exit Error Reporting" is
enabled. Segment 1 contains the digit for the "Recent Closing Reporting". Segment 2 contains the digit for the "Exit
Error Reporting". Refer to the box on page 27.
LOCATION 81 - START PROGRAM AND END PROGRAM COMMUNICATOR CODES (4 segments, numerical
data)
Location 81 contains the digits for a 4+2 format that will be sent if "Start / End Programming Reporting" is enabled.
Segment 1 contains the digit for the "Start Program Reporting". Segment 2 contains the digit for the "Start Program
Reporting". Segment 3 contains the digit for the "End Program Reporting". Segment 4 contains the digit for the "End
Program Reporting". Refer to the box on page 27.
LOCATION 82 - END DOWNLOAD COMMUNICATOR CODE (4 segments, numerical data)
Location 82 contains the digits for a 4+2 format that will be sent if "End Downloading Reporting" is enabled. Segment
1 and 2 are Reserved. Segment 3 contains the digit of the "End Download Reporting". Segment 4 contains the digit
of the "End Download Reporting". Note: A start download report will be sent to the internal event log. Refer to the box
on page 27.
LOCATION 83 - CANCEL COMMUNICATOR CODE (1 segments, numerical data)
Location 83 contains the digit for a 4+2 format that will be sent if "Cancel Reporting" is enabled. Segment 1 contains
the digit for the "Cancel Communicator Reporting". Refer to the box on page 27.
LOCATIONS 84-87 RESERVED.
NX-8E CONTROL
SLOW COMMUNICATOR FORMAT CODES
Segment 3 = Partition 3
Segment 4 = Partition 4
Segment 3 = Partition 3
Segment 4 = Partition 4
Segment 5 = Partition 5
Segment 6 = Partition 6
Segment 5 = Partition 5
Segment 6 = Partition 6
Segment 7 = Partition 7
Segment 8 = Partition 8
Segment 7 = Partition 7
Segment 8 = Partition 8
29