Mechanical Specifications - Seco Qseven CQ7-D59 User Manual

For rel. 2.0 / 2.1 compliant modules on 3.5” form factor

Table of Contents

2.4 Mechanical Specifications

The board dimensions: 147 x 102 mm (5.79" x 4.02").

Printed circuit of the board is made of eight layers, some of them are ground planes, for

disturbance rejection.

In order to fix the Qseven

module to the carrier board, on CQ7-D59 are soldered two

metallic spacers (those farthest from MXM connector), height 7mm, 2.5mm diameter, that

can be used for the fixing of standard size Qseven

As a factory alternative, it is possible to solder two spacers for fixing of μQseven

this factory alternative has been done since the spacers needed for fixing of μQseven

modules would interfere with electronic devices soldered on standard Qseven

Optionally, other two metallic spacers (those nearest to the MXM connector) can be

soldered on the carrier board, in order to have four fixing points and improve the mechanical

stability of the system

Considering possible application scenarios, please take notice of what kind of modules it

could be possible to use, before purchasing one of the possible configurations.

CQ7-D59

modules.

modules:

modules.

Table of Contents