Seco Qseven CQ7-D59 User Manual page 53

4.2 Accessories
SECO can offer the following accessories in completion of CQ7-D59 functionalities
4.2.1 Accessories kit CABKITD59
connectors CN31 and CN32
- Front Panel Board with connecting cable to remote signals from carrier board CN20 and have in the Front Panel Board both Power and Reset Button, and the LED for
signalling activity on SATA channel and Power On states.
4.2.2 HD Audio Adapter module VA67
CQ7-D59
CQ7-D59 - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author: S.O. - Reviewed by S.B. Copyright © 2021 SECO S.p.A.
This accessories kit includes the following items
- Dual USB 2.0 Type A adapters with standard PC mounting plate. Can be used to carry out the signals of internal USB ports #4-
#5 to standard USB 2.0 Type A receptacles
- SATA power cable, for connection of power rails of external SATA disks / SSDs to internal SATA power connector CN9
- SATA data cable, for connection of data of external SATA disks / SSDs to internal SATA data connector CN8
- 4-wires Power cable, for the adapting of external PSU to Power In connector CN21
- 2 x DB-9 male serial port adapter cables, for the connection of external devices with standard RS-232 interface to carrier board's
According to the Qseven ® standard, the Qseven
CQ7-D59 carrier board doesn't have any audio codec onboard, and it is therefore not able to offer directly a PC-like audio interface.
Instead, on the Carrier Board's connector CN28 are carried out the generic audio signals coming out from the Qseven
®
For the Qseven modules offering HD Audio interface, it is possible to use an HD Audio adapter module, which can be mounted directly
on carrier board's connector CN28 (piggyback connection).
The module embeds a Cirrus Logic CS4207 HD Audio Codec, and makes available two audio interfaces on standard 3.5mm stereo audio
jacks. The lime audio jack carries out the amplified Headphone interface, while the pink audio jack carries out the Mic Input interface.
4.2.3 I2S Audio Adapter module VA74
®
For the Qseven modules offering I2S Audio interface, it is possible to use an I2S Audio adapter module, which can be mounted directly
on carrier board's connector CN28 (piggyback connection).
The module embeds a Freescale SGTL5000 Audio Codec, and makes available two audio interfaces on standard 3.5mm stereo audio
jacks. The lime audio jack carries out the amplified headphone interface, while the pink audio jack carries out the Mic Input interface.
® modules can implement HD Audio, AC'97 or I2S Audio interface. For this reason, the
®
module.
53