Mechanical Specifications; Supported Operating Systems - Seco Q7-A75-J User Manual

2.4 Mechanical Specifications

®
According to Qseven specifications, board dimensions are: 40 x 70 mm (1.57" x 2.76").
Printed circuit of the board is made of twelve layers, some of them are ground planes, for
disturbance rejection.
The MXM connector accommodates various connector heights for different carrier board
®
applications needs. Qseven specification suggests two connector heights, 7.8mm and
7.5mm, but it is also possible to use different connector heights, also remaining compliant
to the standard.
When using different connector heights, please consider that, according to Qseven
specifications, components placed on bottom side of μQ7-A75-J will have a maximum
height of 2.2mm ± 0.1. Keep this value in mind when choosing the MXM connector's
height, if there is the need to place components on the carrier board in the zone below the
®
Qseven module.

2.5 Supported Operating Systems

μQ7-A75-J module supports the following operating systems:
Linux
Android
SECO will offer the BSP (Board Support Package) for these O.Ss, to reduce at minimum SW development of the board, supplying all the drivers and libraries
needed for use both with the Qseven
same IC's.
For further details, please visit http://www.seco.com.
μQ7-A75-J
μQ7-A75-J User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by P.Z. - Copyright © 2016 SECO S.r.l.
®
board and the Carrier Board, assuming that the Carrier Board is designed following SECO Qseven Design Guide, with the
®
15