Seco Qseven CQ7-D59 User Manual page 14

For rel. 2.0 / 2.1 compliant modules on 3.5” form factor

Table of Contents

2.1 Introduction

CQ7-D59 is a carrier board for Qseven

with release 2.1 of the specifications.

Qseven

is a form factor designed to minimize space consumption, since it integrates in only 70x70mm of space all core components of a common PC architecture

(CPU, RAM, Graphic, audio, etc.). All the functionalities are made available through a standardized card edge connector, from which all signals can be taken and

carried to the appropriate external connector in the carrier board and/or to other internal component, to implement more functionalities other than included in the

standard Qseven

bus interface.

The connection to the Qseven

board is implemented through a standardized MXM connector, which is a proven high speed signal interface connector.

The board has been specifically designed for taking advantage of all possible features that can be offered by x86 and/or ARM architectures on Qseven

All the features on the CQ7-D59 board are implemented according to the Qseven

compatible with Qseven

Spec. 2.1 modules.

The list of features that are effectively available depends on the configuration of the carrier board and of the Qseven

CQ7-D59 board is specially designed for being both an advanced development board, for skilled users who want to design their own carrier boards, and a good

solution for mass production, for customers whose needing are satisfied by this compact and versatile Carrier Board.

All the components mounted onboard are certified for industrial temperature range.

CQ7-D59

rel. 2.0 / 2.1 compliant modules, in 3.5" mechanical Form Factor. It is specifically designed to support all features introduced

standard bus interface, thus the board is fully Qseven

module used.

modules.

Rel. 2.1 compliant and

Table of Contents