Connectors Description - Seco Qseven CQ7-D59 User Manual

3.3 Connectors description

®
3.3.1 Qseven Connector
®
According to Qseven specifications, all interface signals are reported on the card edge connector, which is a 230-pin Card Edge that can be inserted into standard
230 pin MXM connectors, as described in Qseven
Not all signals contemplated in Qseven
Therefore, please refer to the following table for a list of effective signals reported on MXM connector. Please be aware that on signals' description, Input and Output
(if specifically written) are referred to the Qseven
outputs and inputs).
NOTE: Even pins are available on top side of Qseven
BOTTOM SIDE
Description
Power Ground
Gigabit Ethernet differential pair 3-
Gigabit Ethernet differential pair 3+
Ethernet 100Mb/s link indicator
Gigabit Ethernet differential pair 1-
Gigabit Ethernet differential pair 1+
Ethernet Reference Voltage
Wake Input
Suspend Status Output
Sleep Button Input
Power Ground
Power Ground
Battery Low Input
Serial ATA Channel 0 Transmit +
CQ7-D59
CQ7-D59 - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author: S.O. - Reviewed by S.B. Copyright © 2021 SECO S.p.A.
®
specifications.
® standard are implemented on MXM connector, due to the functionalities really implemented on CQ7-D59 CPU module.
®
module, i.e. they are inputs and outputs of the module itself, not of the carrier board (where they are, respectively,
®
module; odd pins are available on bottom side of Qseven
Qseven
Pin name
GND
GBE_MDI3-
GBE_MDI3+
GBE_LINK100#
GBE_MDI1-
GBE_MDI1+
N.C.
GBE_CTREF
WAKE#
SUS_STAT#
SLP_BTN#
GND
GND
BATLOW#
SATA0_TX+
® Connector - CN1
Pin nr. Pin nr. Pin name
1 2 GND
3 4 GBE_MDI2-
5 6 GBE_MDI2+
7 8 GBE_LINK1000#
9 10 GBE_MDI0-
11 12 GBE_MDI0+
13 14 GBE_ACT#
15 16 SUS_S5#
17 18 SUS_S3#
19 20 PWRBTN#
21 22 LID_BTN#
23 24 GND
25 26 PWGIN
27 28 RSTBTN#
29 30 SATA1_TX+
®
module.
TOP SIDE
Description
Power Ground
Gigabit Ethernet differential pair 2-
Gigabit Ethernet differential pair 2+
Ethernet 1000Mb/s link indicator
Gigabit Ethernet differential pair 0-
Gigabit Ethernet differential pair 0+
Ethernet Activity indicator
Soft Off (S5) output Signal
Suspend to RAM (S3) output signal
Power Button Input
LID Button Input
Power Ground
QSeven ® module Power Good Input
Reset Button Input
Serial ATA Channel 1 Transmit +
24