Mechanical Specifications - Seco Qseven CQ7-A30 User Manual

2.4 Mechanical Specifications

The board dimensions are 345 x 170 mm (13.58" x 6.69").
Printed circuit of the board is made of six layers, some of them are ground planes, for disturbance rejection.
®
In order to fix the Qseven module to the carrier board, on CQ7-A30 are soldered four metallic spacers, height 5mm, 2.5mm diameter, that can be used for the
®
fixing of standard size Qseven modules.
It is possible to solder two further spacers for fixing of μQseven
fixing of μQseven
®
modules would interfere with electronic devices soldered on standard Qseven
CQ7-A30
CQ7-A30 - Rev. First Edition: 1.0 - Last Edition: 2.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
®
modules. They are not directly soldered on the evaluation platform since the spacers needed for
®
modules.
18