Changing To A Maintenance Mode - JRC JLR-7900 Quick Reference

4.2.3 Changing to a maintenance mode

Before starting installation, the mode must be changed to a maintenance mode to prevent an
operation error.
Change the mode to a maintenance mode by the initial operation.
Procedure
１．
Display a main menu by pressing
２．
Press
３．
The menu is changed to a maintenance menu (maintenance mode).
When the mode is changed to a maintenance mode, the [M] icon is displayed at the bottom of the
screen.
Normal mode
 Returning to a normal mode
When and
mode is reset to a normal mode.
When the power is turned on, the system starts in normal mode.
and for 3 seconds.
Figure 4.1 Transition of menu screens
are pressed for 3 seconds or no operation is performed for 3 minutes, the
(normal mode).
Maintenance mode
and 3 seconds
The [M] icon is
displayed.
4-13