JRC JLR-7900 Quick Reference page 52

Main menu
Sub-menu1
Sub-menu2
Sub-menu3
6> INTERFACE
DATA I/O
DATA IN/OUT １,２,３
DATA IN/OUT
BIT RATE
RS-485
SENTENCE
(VERSION)
BIT RATE
CONTACT INPUT
DIAGNOSIS
4-22
Select the output format.
【 NMEA, IEC 】
Select the port to "SEND" or "RECEIVE".
Cannot set DATA IN/OUT1, 2, 3.
・When the port is set for output, output sentence and
output interval can be selected.
・When the NMEA format is set, output NMEA version
can be selected.
【NMEA version：1.5, 2.1, 2.3, 4.0 】
Select the bit rate.
Cannot set DATA IN/OUT1,3
【 4800, 9600, 19200, 38400bps 】
Select the output format.
【 NMEA, IEC 】
Select the output sentence and interval.
・When the NMEA format is set, output NMEA version
can be selected.
【NMEA version：1.5, 2.1, 2.3, 4.0 】
Select the bit rate.
【 38400, 57600, 76800, 115200bps 】
Selectting a contact input port.
【 DIMMER、ACK 】
Outputting alarm histry and setting vlaue.
・Data is output from a data IN/OUT1 port.
Explanation Default
NMEA
IO1:
SEND
IO2:
SEND
IO3:
RECE-
IVE
IO1:
9600
IO2:
4800
IO3:
9600
IEC
-
115200
DIMM
ER
-