List Of Viewer Messages; Messages Displayed In The Information Display - Canon 1064C001 Operation Manual

List of Viewer Messages

Messages Displayed in the Information Display

Messages displayed in the information display of the Camera Viewer are classified into the following three types.
Icon Category
Information Message
Warning Message
Error Message

Warning Message
Message
The camera is busy.
Failed to get camera control privileges.
You are not connected to the camera.
Please get camera control privileges.
Another user is already connected as an
administrator.
No audio device.
R13 M50 H652 H651
Insufficient memory card capacity.
Recording to memory card is not allowed.
You cannot control the camera unless you exit
Digital PTZ and Viewer PTZ.
You cannot control the camera unless you exit
R13 R12
Viewer PTZ.
Start Digital PTZ or Viewer PTZ.
Waiting for control privileges.
Recreating video management information.
User authentication failed.
Failed to initialize the ActiveX plugin.
JavaScript is not available or disabled on your
web browser.
Displays help messages related to various buttons, pull-down lists, etc., as well as frame
rate and other information.
Displays a message urging caution to the user when camera control privileges cannot be
obtained, the audio session stops, etc.
Displayed when a system error occurs in the viewer.
The connection limit was exceeded.
The request for camera control privileges was denied because the camera
was being used by the administrator, etc.
An attempt was made to operate the camera when the camera was not
connected.
An attempt was made to operate the camera without camera control
privileges.
The administrator is already connected to the camera.
The [Audio Reception] button or [Audio Transmission] button was clicked
while the computer audio device was unavailable or disabled.
An attempt was made to manually record to a memory card with insufficient
capacity.
Recording to the memory card failed because [Memory Card Operation
Status] > [Operation Settings] was not set to [Save Logs and Videos].
The video display area was clicked with the Digital PTZ or Viewer PTZ
M50
enabled.
The video display area was clicked with the Viewer PTZ enabled.
H652 H651
You clicked the pan/tilt slider, zoom slider, or video display area with the
Digital PTZ and Viewer PTZ disabled.
A general user is waiting to obtain control.
The video management information on the memory card is being recreated.
User authentication failed, or the [Audio Transmission] button was clicked
with [Audio Distribution] cleared for an authorized user in [User Authority]
when connecting as an authorized user.
When the ActiveX plug-in is not installed after starting the Camera Viewer,
the Camera Viewer waits 10 seconds for the plug-in to be installed, but the
plug-in was not installed after 10 seconds.
JavaScript could not be used in the web browser.
Explanation
Explanation
6
243