Configure [Duration (Sec)] for time required for an object to be detected as a removed object.
4
Click [Apply].
5
Important
• A removed object may not be detected in the following cases.
– When long and thin objects are removed
– When the same object is placed continuously and some of the objects are removed
– When objects of the same shape are placed together and some of the objects are removed
• If the video inside the detection area changes without an object being removed, it may be misdetected as a removed object.
Specifying the Profile Lines of Objects for Removal Detection
Select [Specify a profile and detect].
1
2
Select [Rectangular] or [Polygonal].
Use the video display area to configure an area along the profile lines of the object you do not want removed
3
(P. 180).
Alternatively, set the profile lines automatically using the following procedure.
Temporarily remove the target object for removed object detection from the video display area.
▼
Click [Restart intelligent function] (P. 198).
The background image is generated
▼
Return the target object to its original position.
▼
Click [Automatic Profile Settings].
A profile line of the object is drawn using a polygon with up to 32 vertices.
If there are multiple objects detected, the profile lines are drawn around the object occupying the largest area.
▼
184
Set detection area