Viewer Ptz And Digital Ptz; Magnifying And Display Part Of Video (Viewer Ptz) - Canon 1064C001 Operation Manual

Viewer PTZ and Digital PTZ

Viewer PTZ and Digital PTZ are both functions which allow easy panning, tilting and zooming using the digital zoom.
Viewer PTZ
Enlarges the specified part of the video transmitted from the
camera and then displays it in the viewer.
The size of the received data is large.
Camera control is not required.
PTZ operation can be performed independently for each
Viewer.
Custom trim size

Magnifying and Display Part of Video (Viewer PTZ)

You can use the Viewer PTZ to magnify part of a video (using digital zoom) without moving the camera.
This feature does not use the camera's pan, tilt, or zoom features, making it useful for situations like the use of the intelligent
function, where you do not want to change the camera position.
R13 R12
Important
You cannot perform camera operations by clicking/dragging in the video display area while using the Viewer PTZ.
Note
• You cannot record the video magnified with the Viewer PTZ.
• You can display the magnified video in full screen mode when using the Viewer PTZ.
Click the [Viewer PTZ] button.
1
The [Viewer PTZ] button changes active (purple), and the Viewer PTZ panel is displayed in the control display
area.
Initially, the preview frame (light blue) surrounds the entire video.
In the Viewer PTZ panel, drag an edge of the preview frame to make it smaller.
2
The video of the area inside the preview frame is magnified to fill the video display area.
M50
M50 H652 H651
Digital PTZ
Transmits only the cropped part of the entire area that can
be captured by the camera.
The size of the received data is small.
Camera control is required.
Independent operation cannot be performed by each
Viewer. If multiple Viewers are connected, the same Digital
PTZ display is applied to the other Viewers.
Five levels of trim size
4
75