List Of Viewer Messages; Messages Shown In The Information Display - Canon VB-H47 Operation Manual

List of Viewer Messages

Messages Shown in the Information Display

Messages shown in the information display of the Camera Viewer are categorized into the following three types.
Icon Category
Information Message
Warning Message
Error Message

Warning Message
Message
JavaScript is not available or disabled on your
web browser.
Recreating video management information.
You do not have video reception permission.
No audio device.
Audio reception is restricted.
Audio transmission is restricted.
Currently in the process of starting or ending
audio transmission and receiving.
Please get camera control privileges.
Failed to get camera control privileges.
You are not connected to the camera.
Cannot display the set video in this environment.
Your web browser is not supported.
Another user is already connected as an
administrator.
Waiting for control privileges.
Cannot display the selected video in this
environment. Changed to a video that can be
displayed.
Displays help messages related to various buttons, pull-down lists, etc., as well as frame
rate and other information.
Displays a message alerting the user when camera control privileges cannot be
obtained, the audio session stops, etc.
Displayed when a system error occurs in the Viewer.
JavaScript in the web browser could not be used.
The video management information on the memory card is being recreated.
A user without video reception privileges tried to connect to the camera.
The [Audio Reception] button or [Audio Transmission] button was clicked
while the computer audio device was unavailable or disabled.
Clicked the [Receive Audio] button when [Audio] > [Audio] > [Audio Server]
> [Audio Transmission from the Camera] was set to [Disable].
Clicked the [Audio Distribution] button while receiving audio when [Audio
Communication Method] was set to [Half Duplex].
HM4x S32VE
Clicked the [Audio Transmission] button when [Audio] > [Audio] > [Audio
Server] > [Audio Reception from Viewer] was set to [Disable].
Clicked the [Audio Distribution] button while receiving audio when [Audio
Communication Method] was set to [Half Duplex] in [Audio] > [Audio] >
[General Audio].
Attempted to start or stop audio transmission and reception while process is
running for starting or stopping of audio transmission and reception.
An attempt was made to operate the camera without camera control
privileges.
The request for camera control privileges was denied because the camera
was being used exclusively by the administrator, etc.
An attempt was made to operate the camera when the camera was not
connected.
An attempt was made to display H.265 video while connecting via HTTP
using the web browser that cannot display H.264/H.265 video.
Started the Camera Viewer with a web browser that does not support the
operating environment.
The administrator is already connected to the camera.
A guest user enters a state of waiting to obtain control privileges.
In the case selected video stream cannot be displayed in the current
environment
179
Explanation
Explanation
S32VE