Setting The Focus - Canon 1064C001 Operation Manual

Digital Zoom Range
Controls the rotation.
To operate the camera angle using the [Rotation] slider, click the slider or drag the tab to adjust the camera to an
angle where the subject in the video is horizontal.

Setting Camera Angle by Clicking Video
If you click anywhere in the video display area, the camera angle will change to center on that location.
If you click outside the pan or tilt range, however, the camera angle will only change for the one which is within its
range.
Note
If the camera moves differently than the intended operation, or if settings in the full range displayed by control assist cannot be
made, control assist may be out of alignment with the actual camera angle. In this case, click [Exec] for [Control Assist Correction],
and set the camera angle again.

Setting the Focus

You can automatically or manually focus on the subject, or fix the focus at infinity. When manually operating the focus, you
can use the One-shot AF feature to focus on the subject.
For precautions, etc. regarding the focus, please refer to the "Important" and "Note" sections of [Camera] > [Initial Setting]
> [Camera Settings] > [Focus] on the Setting Page (P. 114).
3
49