DMM6500 6½-Digit Multimeter with Scanning Calibration and Adjustment Manual
cal.adjust.date
This attribute contains the date when the instrument was last adjusted.
Type
TSP-Link accessible
Attribute (RW)
Yes
Usage
adjustDate = cal.adjust.date
cal.adjust.date = (os.time{year = year, month = month, day = day})
cal.adjust.date = (os.time({year = year, month = month, day = day, hour = hour, min =
minute, sec = second}))
adjustDate
year
month
day
hour
minute
second
Details
The date and time is returned in the format:
MMM DD YYYY HH:MM:SS.NNN
Where:
•
MMM DD YYYY is the month, date, and year
•
HH:MM:SS.NNN is the hour, minute, second, and fractional second
You can read this command if calibration is locked or unlocked. To set the date and time, calibration
must be unlocked.
Example
lastCal = cal.adjust.date
print(lastCal)
Also see
cal.adjust.count
DMM6500-905-01 Rev. E June 2021
Affected by
Not applicable
The date when the last adjustment occurred
Year; must be more than 1970
Month (1 to 12)
Day (1 to 31)
Hour in 24-hour time format (0 to 23)
Minute (0 to 59)
Second (0 to 59)
(on page 4-2)
Where saved
Nonvolatile memory
Assign the last adjustment date of the instrument to a user
variable named lastCal.
Output the value. Example output:
Sep 23 2018 10:07:51.447
Section 4: TSP command reference
Default value
Not applicable
4-3