Table of Contents
Advertisement
Setup menus
<OPERATION>
No./Item
100
For selecting the direct search dial operation.
0000
DIAL:
SEARCH ENA
Direct search dial operations are performed.
0001
KEY:
Operation does not transfer to the search
mode unless the SHTL, JOG or VAR button is
pressed.
101
For selecting the maximum speed of shuttle
operations.
0000
SHTL MAX
k9.8:
0001
k16:
0002
k32:
<Note>
Depending on the tape format, the actual tape running
speed differs slightly from what is indicated by the
superimposed display
102
For setting the maximum speed of fast
forward and rewind operations.
FF. REW MAX
0000
k16:
0001
k32:
0002
k50:
0003
k60:
0004
k100:
<Note>
The maximum speed is automatically limited to 50x for
the DVCPRO HD and DVCPRO50 format and to 32x for
the DV and DVCAM formats.
104
For selecting whether a warning is to be
displayed when the REF VIDEO signal has not
REF ALARM
been connected.
0000
OFF:
0001
ON:
1
For selecting the VTR mode which is to be set
105*
to the EE mode when "0 (EE)" is selected as
the setup menu item No.140 (OUTPUT)
AUTO EE SEL
setting.
0000
S/F/R:
The EE mode is established when the VTR is
in the STOP, FF or REW mode.
0001
STOP:
The EE mode is established when the VTR is
in the STOP mode only.
*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or
SD) mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.
The underlining (__) denotes the factory setting mode.
84
Description of setting
k9.8 times normal speed
k16 times normal speed
k32 times normal speed
.
k16 times normal speed
k32 times normal speed
k50 times normal speed
k60 times normal speed
k100 times normal speed
A warning is not displayed.
A warning is displayed by the
blinking STOP lamp.
No./Item
106
For selecting the video and audio output
statuses in the EJECT mode.
EJECT EE SEL
0000
EE:
The EE mode is always established regardless of
the setup menu item No.140 (OUTPUT) setting.
0001 BLACK:
When setup menu item No.140 (OUTPUT) is set to:
"EE":
"
TAPE":
0002
GRAY:
When setup menu item No.140 (OUTPUT) is set to:
"EE":
"
TAPE":
<Note>
If 0 (EE) is selected while the 23/24 Hz or 25 Hz (HD or
SD) mode has been selected as the system menu item
No.25 (SYSTEM FREQ) setting, the VTR construes that
1 (BLACK) has been selected.
1
For selecting what signals are to be output
107*
when the EE mode is established.
0000 NORMAL:
EE MODE SEL
Signals delayed by an amount equivalent to the time taken
for the signals to be processed internally are output.
0001
THRU:
The signals are not processed internally but output in their
original form with no delay.
<Note>
The internal operation forcibly sets "NORMAL" when an
editing mode is selected or when SDTI is selected
during video input signal selection.
108
For setting the play startup time in 1-frame
increments.
PLAY DELAY
0000
:
0015
15
1
For selecting whether to engage playback framing
109*
lock in 4-field increments or in 2-field increments.
<59/60Hz>
CAP. LOCK
0000
0001
110
For selecting whether the tape is to be
automatically wound back to its beginning
AUTO REW
when the tape-end has been detected.
0000
OFF:
0001
ON:
1
For selecting whether to automatically stop the
111*
VTR when the counter value is at the "0" position
during CTL mode FF and REW operations.
MEMORY
0000
OFF:
STOP
0001
ON:
<Notes>
• Either the stop or still picture (SHTL STILL or VAR
STILL) mode, whichever has been set using setup
menu
item
established when the VTR is stopped.
• If both the AUTO REW function and MEMORY
function have been selected at the same time, the
AUTO REW operation takes priority.
Description of setting
.
The EE mode is established
The BLACK mode is established for
the video signals, and the audio
signals are muted.
.
The EE mode is established
The GRAY mode is established for the
video signals, and the audio signals
are muted.
0
:
<50Hz>
2F
0000
2F
4F
0001
4F
0002
8F
The tape stops when it reaches the
tape-end.
The tape is rewound to its beginning.
The VTR does not stop.
The VTR is automatically stopped.
No.307
(AFTER
CUE-UP),
is
Advertisement
Table of Contents
