Panasonic AJ-HD1700PE Operating Instructions Manual page 89

Setup menus
<EDIT>
(continued)
No./Item
1 For setting the allocation of the channels for
320*
the analog audio presets of a controller when
a controller without a function to control the
EDIT RPLCE1
edit presets of the digital audio signals is
used to edit the digital audio signals of the
VTR.
The VTR's CH1 edit presets are set to ON or
OFF following the analog audio signals specified
by the controller.
0000 N-DEF:
Not set.
0001 CH1:
The analog CH1 edit presets are followed.
0002 CH2:
The analog CH2 edit presets are followed.
0003 CH1+2:
The analog CH1 or CH2 edit presets are
followed.
1 As with setup menu item No.320, the VTR's
321*
CH2 edit presets are set to ON or OFF
following the analog audio signals specified
EDIT RPLCE2
by the controller.
0000 N-DEF:
Not set.
0001 CH1:
The analog CH1 edit presets are followed.
0002 CH2:
The analog CH2 edit presets are followed
0003 CH1+2:
The analog CH1 or CH2 edit presets are
followed.
1 As with setup menu item No.320, the VTR's
322*
CH3 edit presets are set to ON or OFF
following the analog audio signals specified
EDIT RPLCE3
by the controller.
0000 N-DEF:
Not set.
0001 CH1:
The analog CH1 edit presets are followed.
0002 CH2:
The analog CH2 edit presets are followed
0003 CH1+2:
The analog CH1 or CH2 edit presets are
followed.
*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or
SD) mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.
The underlining (__) denotes the factory setting mode.
Description of setting No./Item
1 As with setup menu item No.320, the VTR's
323*
CH4 edit presets are set to ON or OFF
following the analog audio signals specified
EDIT RPLCE4
by the controller.
0000 N-DEF:
Not set.
0001 CH1:
The analog CH1 edit presets are followed.
0002 CH2:
The analog CH2 edit presets are followed.
0003 CH1+2:
The analog CH1 or CH2 edit presets are
followed.
1 As with setup menu item No.320, the VTR's
324*
CUE edit presets are set to ON or OFF
following the analog audio signals specified
EDIT RPLCEC
by the editor or controller.
0000 N-DEF:
Not set.
0001 CH1:
The analog CH1 edit presets are followed.
0002 CH2:
The analog CH2 edit presets are followed.
0003 CH1+2:
The analog CH1 or CH2 edit presets are
followed.
Description of setting
89