Table of Contents
Advertisement
Function menus
<HOME>
Status display 2
Indicator
SCH
This lights when the SCH phase of the SDREF
signal is within the prescribed range.
CF
This lights when color framing is locked.
DF
This lights during recording or playback in the
drop frame mode.
<Note>
If the time code data could not be read properly
("T¢R" is displayed), the display of the previous
status is held.
Operation mode (speed) display
This indicates the current operation mode (including
the speed display).
Display
EJECT
Eject mode
STANDBY OFF
Standby OFF mode
T.RELEASE
Tension release mode
STOP
Stop mode
PREROLL
Preroll mode
PLAY
Playback mode
PLAY i
Special
adjustment) mode (FWD direction)
PLAY j
Special
adjustment) mode (REV direction)
REC
Recording mode
JOG
Jog mode
REV/STILL/FWD
VAR (speed)
Variable mode
[j4.9 to i4.9]
SHTL (speed)
Shuttle mode
[j32.0 to i32.0]
FF
Fast forwarding mode
REW
Rewinding mode
EDIT
Editing mode
AUTO EDIT
Automatic editing mode
PREVIEW
Preview mode
REVIEW
Review mode
When function F6 (VARMEM) on <HOME SHIFT> is "ON"
DSPD (speed)
Initial speed setting of variable memory
[j1.0 to i2.0]
DSMP (speed)
Playback speed memory mode of variable
[j1.0 to i2.0]
memory
DPLY (speed)
Playback mode of variable memory
[j1.0 to i2.0]
DPRV (speed)
Preview mode of variable memory editing
[j1.0 to i2.0]
DEDT (speed)
Execution mode of variable memory editing
[j1.0 to i2.0]
44
Description of setting
Operation mode
playback
(playback
phase
playback
(playback
phase
Remaining tape/total tape display
The lengths of the remaining tape and total tape of the
inserted cassette are displayed in increments of minutes.
Example:
(10 minutes remaining on a 92-minute tape)
REM 10/ 92
<Note>
Slight errors may occur. The remaining tape value
blinks when less than 3 minutes of the tape remain.
Cue time display
This displays the currently registered cue time. (For
details on the cue time operation, refer to "Cue point
registration, preroll and cue-up.")
Cue time operations can be performed on the HOME
screen only.
Time counter displays
Display
CTL
CTL counter data
TCG
Time code data of time code generator
UBG
User's bit data of time code generator
tcg
When the time code data of time code
generator is preset
ubg
When the user's bit data of time code
generator is preset
TCR/T¢R
Time code data of time code reader
UBR/U¢R
User's bit data of time code reader
If the time code data or user's bit data could not be
read out properly, "T
R" or "U
¢
CTL signal is present, the time code data is
supplemented by CTL.
Field mark
TCR 00:00:00:00.
[1st field: " "/2nd field: "."]
(This does not appear when the i0.3k or
j0.3k speed is exceeded.)
Drop frame mark (59/60 Hz mode only)
[Non-drop frame mode: ":"/drop frame
mode: "."]
Variable memory mode indicator
This is displayed when the
button on <HOME SHIFT> is set to "ON." While
is lighted, variable memory operations can be
performed at any time.
(For details, refer to "Variable memory function.")
Total tape
Remaining tape
Description
R" is displayed. If the
¢
(VARMEM) function
F6
VM
Advertisement
Table of Contents
