O Pf1/Pf2 - Panasonic AJ-HD1700PE Operating Instructions Manual

Function menus
<PF1/PF2>
Up to 24 frequently used setup menu items can be
registered. The items are registered on the function
menus shown below.
registered before the VTR leaves the factory.)
To display one of the function menus, press
FT), (PF1 BK),
F2 F3
while holding down the
SHIFT> screen.
Selection marker
Registered menu number
Menu name
SHIFT F1 F2 F3
Item selection cursor
Item number
Category
Item name
Item number
Registration
1.
Selecting the function buttons
Turn the ADJ dial to move the selection marker,
and select one of the function buttons
into which the menu items are to be registered.
2.
Entering the function button
Press the ADJ dial.
The display of the function button entered is
highlighted.
3.
Selecting menu items
Turn the ADJ dial, and select the menu item for
the function button which was selected in step 1
above.
64
(No settings have been
(PF1
F1
(PF2 FT) or (PF2 BK)
F4
button on the <MENU
F
F4 F5 F6
Setting number
Setting
to
F1
4.
Entering the menu items.
Press the ADJ dial.
The target of the ADJ dial operation returns to the
front panel. Whatever was selected in step 3
above is displayed for the registered menu
number and name.
5.
To select a menu item for another function button,
repeat steps 1, 2, 3 and 4 above.
6.
Saving the settings in a PF registration file
To save what has been set in the function buttons
in a PF registration file, press
If (EXIT) is pressed without the settings
F6
having been saved, the settings will be canceled.
When menu items are registered, they can be
called simply by pressing the PF1 or PF2 direct
menu button.
When is pressed :
PF1
<PF1 FT>
When is pressed after pressing
SHIFT
<PF1 BK>
When is pressed :
PF2
<PF2 FT>
When is pressed after pressing
SHIFT
<PF2 BK>
Clearing the menu items
1.
Turn the ADJ dial to move the selection marker,
and select one of the function buttons
whose menu items are to be cleared.
2.
Press (RESET).
F4
number and name displays will now go blank.
3.
To clear the menu items from other function
buttons, repeat steps 1 and 2 above.
4.
To save what has been set in the function buttons
in a PF registration file, press
F6 If (EXIT) is pressed without the settings
F6
having been saved, the above settings will be
canceled.
Clearing all the function button settings
Press (RESET) while holding down the
F4
All the registered menu number and name displays
will now go blank.
All the contents of the PF registration file are cleared.
(They cannot be restored.)
(SET).
F5
:
PF1
:
PF2
to
F1 F6
The registered menu
(SET).
F5
button.
F