Table of Contents
Advertisement
Video Intercom Face Recognition Door Station User Manual
2. Select the Camera No.
3. Select the video standard (PAL and NTSC can be selected).
4. Optional: Enable WDR mode.
5. Set the Brightness, Contrast, Saturation and Sharpness of the video.
6. Click Save.
Note
Click Restore Default Settings to restore all video parameters excluding network
parameters to the factory settings.
Video & Audio
Steps
1. Click Video & Audio to enter the video parameters settings page.
2. Set the parameters.
3. Click Save.
Note
It's suggested to keep the default settings to ensure the video/image quality.
6.4 Device Management
Device management includes device activation, adding device, editing device, and
deleting device, and so on.
Figure 6-16 Video & Audio
39
Advertisement
Table of Contents
