Table of Contents
Advertisement
DS-KH6320-TDE1 Series Network Indoor Station Configuration Guide
Chapter 3 Remote Operation via the Client Software
The Video Intercom module provides remote control and configuration on video intercom products
via the iVMS-4200 client software.
3.1 Activate Device Remotely
You can only configure and operate the indoor station after creating a password for the device
activation.
Before You Start
Default parameters of indoor station are as follows:
Default IP Address: 192.0.0.64.
●
Default Port No.: 8000.
●
Default User Name: admin.
●
Steps
1. Run the client software, enter Device Management, check the Online Device area.
2. Select an inactivated device and click the Activate.
3. Create a password, and confirm the password.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can better protect your product.
4. Click OK to activate the device.
3.2 Device Management
Device management includes device activation, adding device, editing device, and deleting device,
and so on.
After running the iVMS-4200, video intercom devices should be added to the client software for
remote configuration and management.
28
Advertisement
Table of Contents
