Table of Contents
Advertisement
Video Intercom Face Recognition Door Station User Manual
Before You Start
On the linked devices network configuration page, you can configure the network
parameters of main stations, SIP servers and management centers of the same LAN.
The devices can be linked to the door station and realize the linkage between these
devices.
Steps
1. Click Linked Network Configuration to enter linked network configuration page.
2. Enter the main Station IP Adderss, (Main) Door Station IP Address, SIP Server IP
Address, Security Control Panel IP Address and Port No.
3. Select the main door station type from the drop-down list.
4. Click Save to enbale the settings.
Note
•
After adding main station IP Address, the linkage between indoor station and
main station can be realized.
•
After adding the door station IP Address, the video intercom between indoor
stations of same building can be realized.
•
After adding SIP Server Address IP, the video intercom of same community:
video intercom between indoor stations of different building, calling indoor
station from outer door station and video intercom between management
center and indoors.
•
After adding management center IP Address, the events can be uploaded to
the management center.
•
For indoor extension, only parameter about the main indoor station should
be configured.
FTP
After configuring the FTP parameters, the captured pictures of door station will be
uploaded to the FTP server automatically.
Steps
1. Click FTP to enter the FTP parameters settings page.
36
Advertisement
Table of Contents
