HIKVISION DS-KD9613-FE6 User Manual page 38

Video Intercom Face Recognition Door Station User Manual
• Check the checkbox of Enable NTP to enable NTP.
• Enter the server address, NTP port, and synchronization interval.
• DST
• Check the checkbox of Enable DST to enable DST.
• Enter the start time and end time of DST, and set the DST bias.
Note
The default port No. is 123.
System Maintenance
Click System Maintenance to enter the page.
• Click Reboot and the system reboot dialog box pops up. Click Yes to
reboot the system.
• Click Restore Default Settings to restore the default parameters.
• Click Restore All to restore all parameters of device and reset the device
to inactive status.
Figure 6-5 System Maintenance
26