Recognition Parameters Settings; Change Password - HIKVISION DS-KD9613-FE6 User Manual

Video Intercom Face Recognition Door Station User Manual
2) Face at the camera and tap Capture.
3) Tap Save.
Note
• You can tap Retry to capture the face again.
• Up to 3000 faces can be added to the device.
• Every users can add only one face picture.
5. Add fingerprints.
1) Tap Fingerprint.
2) Tap + to add fingerprint.
3) Put your finger on the fingerprint recognition area.
Note
Up to 3000 users can be added. Every user can add up to 10 fingerprints. Up to
5000 fingerprints can be added.
6. Tap √ to save the settings.

5.1.4 Recognition Parameters Settings

Steps
1. Long tap on the initial page for 3 s and slide to the left/right and log in the
backend.
Note
By default, the admin password is activation password.
2. Tap Recognition Parameters.
3. Configure the parameters according to your needs.
4. Tap < to save the settings.

5.1.5 Change Password

Steps
1. Long tap on the initial page for 3 s and slide to the left/right and log in the
backend.
17