A-6 Optional Equipment And Accessories - Sensata Magnum Energy MS Series Owner's Manual

Appendix A – Specifi cations

A-6 Optional Equipment and Accessories

The following components are available for use with the MS Series inverter/charger. Some of these
items are required depending upon the intended use of the inverter.
MMP Series Enclosures
The MMP175-30D, MMP175-60S, MMP250-30D, and MMP250-60S enclosures are for single inverter
applications. The MMP Series enclosures have been specifi cally designed to combine all of the major
components required for a renewable energy system—inverter/battery disconnect, AC overcurrent
protection, grounding connections and a full system inverter bypass switch as a convenient way
to isolate the inverter for battery maintenance—into a single, easy to install pre-wired enclosure.
Remote Switch Adapters
The ME-RSA and ME-RSA-M pigtail adapters allow the inverter to be remotely switched on and
off – with or without a remote display.
Advanced Remote Control
The ME-ARC remote control panel uses an LCD screen and at-a-glance LEDs to provide operating
information and allow advanced features to be confi gured (requires an inverter with advanced
confi gurable features). This LCD remote control also provides advanced monitoring/troubleshooting
and includes a FAVS button to access your favorite features quickly.
Standard Remote Control
The ME-RC remote control panel uses an LCD screen and at-a-glance LEDs display for complete
inverter/charger status. Soft keys provide simple access to menus, and a rotary encoder knob
allows you to scroll through and select a wide range of settings such as: Inverter ON/OFF, Charger
ON/OFF, shorepower breaker setting, AGS control, Meter button, Setup and Tech menus.
Auto Generator Start Controller
The ME-AGS-N Automatic Generator Start controller (Network version) is designed to automatically
start your generator based on low battery condition or high temperature. The AGS controller
includes an input voltage jumper (for 12, 24, and 48-volt battery banks) and a 4-position DIP
(Dual In-line Package) switch which provides the ability to change the relay timing confi gurations
to allow compatibility with a wider range of generators. Adjustable settings when using the ME-
ARC include starting the generator based on battery voltage, time of day, battery State of Charge,
or high temperature.
Battery Monitor Kit
The ME-BMK-NS Battery Monitor Kit is a single battery bank amp-hour meter that monitors the
condition of the battery, provides information to let you know how much energy you have available,
and lets you plan your electrical usage to ensure the battery is not being over-discharged. The –NS
version does not include a DC shunt. Order Part Number: ME-BMK to receive the battery monitor
that includes the 500A/50mv DC shunt.
Fuse Block/Fuses
The TFB series of fuse/fuse-blocks are used to protect the battery bank, inverter, and cables
from damage caused by DC short circuits and overloads. They include a slow-blow, high current
Class-T fuse with mounting block and protective cover. The fuse sizes are available in 125, 200,
300, and 400 amps.
MagWeb
The MagWeb – Wireless (ME-MW-W) or MagWeb – Ethernet (ME-MW-E) are powerful and cost-
eff ective tools for remotely monitoring inverters and accessories. Installed on the network, either
MagWeb provides live internet monitoring of the inverter, battery monitor, and automatic generator
start module. Using your always on Internet connection, either MagWeb makes live and historical
conditions available to you.
Page 61 © 2016 Sensata Technologies