Using Your Angled Bracket Kit; Mounting To A 75 Or 100 Mm Mounting Space; Mounting To A 200 Mm Mounting Space - Matrox QuadHead2Go Q185 User Manual

Using your angled bracket kit

You can mount your Matrox units on standard VESA mounts (75, 100, or 200 mm) or on the back of
devices with VESA compliant mounting holes.
To mount your Matrox unit on a VESA mount, you need two (2) angled brackets

(included in your angled bracket kit).
 Your Matrox unit has two (2) mounting holes on each side. Use four (4) 6 mm M3 screws
(included in your kit) to secure each unit to the angled brackets.
 If a Matrox unit is attached to a VESA mount, no other device can use that VESA mount.

Mounting to a 75 or 100 mm mounting space

To mount your Matrox unit on a 75 or
100 mm mounting space:
 Attach the brackets to your VESA
mount before attaching your
brackets to your unit.
 Use two (2) M4 screws (sold
separately) inserted through a slot in
each bracket to attach your brackets
to the mount.
Use four (4) 6 mm M3 flat-head

screws (included in your kit) to
attach your brackets to your unit.

Mounting to a 200 mm mounting space

To mount your Matrox unit to a 200 mm
mounting space:
 Attach your brackets to your unit
before attaching to your VESA
mount.
 Use four (4) 6 mm M3 pan-head
screws (included in your kit) to
attach your brackets to your unit.
 Use two (2) M4 screws (sold
separately) to attach your brackets to
the mount.
45 Matrox QuadHead2Go Series – User Guide
* sold separately
* sold separately