Matrox QuadHead2Go Q185 User Manual page 24

Connect your digital monitors
2
Connect your monitors to the
connectors on your QuadHead2Go unit.
Connect to your network
3
Connect a network cable to the
connector on your QuadHead2Go unit.
Connect your power supply
4
Connect the 12V power supply included with
your product to the
QuadHead2Go unit. While the power supply
is connected to the unit and electrical socket,
the power LED
For more information on LEDs,
"Description of status LEDs", page
WARNING:
device or on your power cable when unplugging a unit, firmly
hold the power connector, pull back the connector on the cable,
then carefully remove the power cable.
After connecting your QuadHead2Go unit, validate your connection setup
QuadHead2Go setup", page
HDMI OUT
(
LAN
connector on the
12V
is active (not black).
( )
see
25.
To avoid damaging the power connector on your
25).
HDMI IN
1
1
HDMI IN
)
1
HDMI IN
1
Matrox QuadHead2Go Series – User Guide 24
HDMI OUT
2 3 4
2 3 4
HDMI OUT
2 3 4
HDMI OUT
2 3 4
(see "Validating your