Matrox Powerwall Software; Before You Begin; Obtaining Matrox Powerwall Software; Installing Your Software - Matrox QuadHead2Go Q185 User Manual

Matrox PowerWall software

Matrox® PowerWall™ software is available for Matrox QuadHead2Go™
multi-monitor controllers to simplify video wall designs and installations of
your QuadHead2Go devices. The software works in offline mode to
customize configurations of any type and size without the need for an active
connection to a QuadHead2Go. Configurations are then uploaded to your physical devices.
As well as being able to configure your input and outputs resolution, you can also:
Rotate each output independently of the others in 90-degree increments – 90, 180, and

270 degrees – for artistic video wall configurations.
Control and fine-tune bezels using pre-set images to ensure seamless image displays.

 Optimize visuals by cropping, upscaling, or downscaling the content as desired.
This section describes how to install and use Matrox PowerWall software for Windows® Server® 2016,
Windows® 10 Standard (64-bit), Windows® 10 Professional (64-bit), Windows® 10 Enterprise
(64-bit), and Windows® 10 IoT.

Before you begin

 You may need administrator rights to install or uninstall certain software. For more
information, see Windows documentation or contact your system administrator.
To assign an initial IP address to your devices, a DHCP (Dynamic Host Configuration

Protocol) server is recommended.

Obtaining Matrox PowerWall software

Matrox makes the latest PowerWall software available on the Matrox web site
(www.matrox.com/QuadHead2Go/support).

Installing your software

To install the software for your QuadHead2Go product, run the installation program for your
software package. Follow the on-screen instructions.

Accessing Matrox PowerWall software

To access PowerWall, click
(* Depending on your configuration of Windows, this part may not be necessary.)
 * 
Start All apps Matrox PowerWall
* 
Matrox PowerWall
Matrox QuadHead2Go Series – User Guide 30
.