Description Of Supported Connectors; Step-By-Step Connection Setup - Matrox QuadHead2Go Q185 User Manual

Description of supported connectors

Connector
Mini DisplayPort IN Connect your mini DisplayPort cable to your Matrox card. Connect the
Mini HDMI OUT
LAN
Note:
mini HDMI connectors must respect the maximum width (0.551 inches/14 mm) and
thickness (0.331 inches/8.4 mm) stated in the HDMI specifications.
For the mini HDMI connectors, we recommend you use certified HDMI cables that
support your maximum resolution.

Step-by-step connection setup

This section guides you through the step-by-step connection setup of your QuadHead2Go card. For
more information on connectors,
Connect your DisplayPort source
1
Connect your DisplayPort source to the mini
DisplayPort connector on your
QuadHead2Go card.
Connect your digital monitors
2
Connect your monitors to the mini HDMI
connectors on your QuadHead2Go card.
Description
other end of the cable to your audio/video source.
Connect a digital monitor to this connector.
Connect a network cable to this connector.
To connect to the bracket of your Matrox product, the overmold (or boot) of the
see "Description of supported connectors", page
Matrox QuadHead2Go Series – User Guide 13
13.