Description Of Supported Connectors; Step-By-Step Connection Setup - Matrox QuadHead2Go Q185 User Manual

Description of supported connectors

Connector
Mini HDMI IN
Mini HDMI OUT
LAN
Note:
mini HDMI connectors must respect the maximum width (0.551 inches/14 mm) and
thickness (0.331 inches/8.4 mm) stated in the HDMI specifications.
For the mini HDMI connectors, we recommend you use certified HDMI cables that
support your maximum resolution.

Step-by-step connection setup

This section guides you through the step-by-step connection setup of your QuadHead2Go card. For
more information on connectors,
Connect your HDMI source
1
Connect your HDMI source to the mini
HDMI connector on your QuadHead2Go
card.
Connect your digital monitors
2
Connect your monitors to the mini HDMI
connectors on your QuadHead2Go card.
Description
Connect your mini HDMI cable to your Matrox card. Connect the other
end of the cable to your audio/video source.
Connect a digital monitor to this connector.
Connect a network cable to this connector.
To connect to the bracket of your Matrox product, the overmold (or boot) of the
see "Description of supported connectors", page
1 2
Matrox QuadHead2Go Series – User Guide 16
16.
3 4