Matrox QuadHead2Go Q185 User Manual page 20

WARNING: To avoid damaging the
DisplayPort connector on your DisplayPort
monitor cable or on your Matrox product,
carefully remove the DisplayPort cable by
pressing the latch on the top of the DisplayPort
connector while removing the connector.
Connect your digital monitors
2
Connect your monitors to the
connectors on your QuadHead2Go unit.
Connect to your network
3
Connect a network cable to the
connector on your QuadHead2Go unit.
Connect your power supply
4
Connect the 12V power supply included with
your product to the
QuadHead2Go unit.
While the power supply is connected to the
unit and electrical socket, the power LED
is active (not black).
HDMI OUT
( )
LAN
connector on the
12V
( )
Matrox QuadHead2Go Series – User Guide 20