Appendix B - Mounting Your Matrox Unit; Mounting Guidelines - Matrox QuadHead2Go Q185 User Manual

Appendix B – Mounting your Matrox unit
This section provides guidelines for rack mounting your QuadHead2Go unit.

Mounting guidelines

To prevent damage to your Matrox hardware, read the following guidelines before mounting your
Matrox hardware:
Mounting shelf only – To install your mounting shelf, fasten it to the rack as per your

rack's instructions. Head screws compatible with most rack mounts are provided.
 Mounting shelf only – The mounting shelf has existing holes for your Matrox unit that
allow the shelf to be mounted facing forward or backward.
 Use a hand screwdriver to carefully tighten each screw. Make sure to not overtighten the
screws.
 Don't stack anything directly over the device.
Make sure the cables connected to your device are properly secured and that no tension

is applied to them.
 Make sure the ambient temperature doesn't exceed the maximum recommended
temperatures. For more information,
Once your device is mounted, you can connect your system, monitors, and devices to your Matrox
device.
43 Matrox QuadHead2Go Series – User Guide
see "Product information", page 34.