Description Of Connectors; Step-By-Step Connection Setup - Matrox QuadHead2Go Q185 User Manual

Description of connectors

Connector
12V DC power
DisplayPort IN
HDMI OUT
LAN
Note:
respect the maximum width (0.823 inches/20.9 mm) and thickness (0.452 inches/11.5
mm) stated in the HDMI specifications.
For the HDMI connectors, we recommend you use certified HDMI cables that support
your maximum resolution.

Step-by-step connection setup

This section guides you through the step-by-step connection setup of your QuadHead2Go unit. For
more information on connectors,
Connect your DisplayPort source
1
Connect your DisplayPort source to the
DisplayPort IN
QuadHead2Go unit.
19 Matrox QuadHead2Go Series – User Guide
Description
Connect the 12V DC power supply included with your product to this
connector. While the power supply is connected to the device and
electrical socket, the power LED (
information on LEDs,
Connect your DisplayPort cable to your Matrox unit. Connect the other
end of the cable to your audio/video source.
Connect a digital monitor to this connector.
Connect a network cable to this connector.
To connect your monitors, the overmold (or boot) of the HDMI connectors must
see "Description of connectors", page
connector on your
) is active (not black). For more
see "Description of status LEDs", page 25.
19.