Sata Cable - HP Envy 13-1030 Maintenance And Service Manual

Removal and replacement procedures

SATA cable

Description
SATA cable
Before removing the SATA cable, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the top cover (see
6. Remove the system board (see
Remove the SATA cable:
1. Turn the system board upside down, with the rear toward you.
2. Disconnect the SATA cable 1 from the system board.
3. Remove the SATA cable 2.
Reverse this procedure to install the SATA cable.
4–24
"Battery" on page 4-7).
"Top cover" on page 4-8).
"System board" on page 4-20).
Spare part number
538347-001
Maintenance and Service Guide