Rtc Battery - HP Envy 13-1030 Maintenance And Service Manual

RTC battery

Description
RTC battery (includes double-sided tape)
Before removing the RTC battery, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the top cover (see
6. Remove the system board (see
Remove the RTC battery:
1. Disconnect the RTC battery cable 1 from the system board.
2. Detach the RTC battery 2 from the system board. (The RTC battery is attached to the system board with
double-sided tape.)
3. Remove the RTC battery.
Reverse this procedure to install the RTC battery.
Maintenance and Service Guide
"Battery" on page 4-7).
"Top cover" on page 4-8).
"System board" on page
Removal and replacement procedures
4-20).
Spare part number
538345-001
4–25