Setup Utility (BIOS)
System Configuration menu
Select
Language Support
Virtualization Technology (select models only)
Fan Always On
Fast Charge Mode
Action Keys Mode
Boot Options
Diagnostics menu
Select
Primary Hard Disk Self Test
Memory Test
5–4
To do this
Change the Setup Utility language.
Enable/disable the processor Virtualization Technology.
Enable/disable Fan Always On. When enabled, the computer
fan will always be on.
Enable/disable the Fast Charge Mode for the primary and
accessory batteries.
Enable/disable the Action Keys.
Set the following boot options:
■ POST Hot Key Delay (sec.)—Set the delay for the user to
press hot keys in intervals of 5 seconds each (0, 5, 10,
15, 20).
■ IOS:
❐ Enable/disable IOS.
❐ Sets the delay for the user to start Windows in intervals
of 5 seconds each (0, 5, 10, 15, 20).
■ Floppy Boot—Enable/disable boot from diskette.
■ Network Adapter Boot—Enable/disable boot from external
Network Adapter.
■ Boot Order—Set the boot order for:
❐ Notebook Hard Drive
❐ USB Diskette on Key/USB Hard Drive
❐ USB CD/DVD ROM Drive
❐ USB Floppy
❐ Network adapter
To do this
Run a comprehensive self-test on the hard drive.
Run a diagnostic test on the system memory.
Maintenance and Service Guide