Bluetooth Module - HP Envy 13-1030 Maintenance And Service Manual

Removal and replacement procedures

Bluetooth module

✎
The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is
available using spare part number 538339-001.
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the top cover (see
Remove the Bluetooth module:
1. Release the Bluetooth module 1 by lifting it as far as the Bluetooth module cable allows.
2. Disconnect the Bluetooth module cable 2 from the system board.
3. Remove the Bluetooth module.
Reverse this procedure to install the Bluetooth module.
4–18
"Battery" on page 4-7).
"Top cover" on page 4-8).
Spare part number
537921-001
Maintenance and Service Guide