Fan/Heat Sink Assembly - HP Envy 13-1030 Maintenance And Service Manual

Fan/heat sink assembly

Description
Fan/heat sink assembly (includes replacement thermal material)
Before removing the fan/heat sink assembly, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the top cover (see
6. Remove the system board (see
Remove the fan/heat sink assembly:
1. Disconnect the fan cable from the system board.
2. Turn the system board upside down, with the rear toward you.
Maintenance and Service Guide
"Battery" on page 4-7).
"Top cover" on page 4-8).
"System board" on page
Removal and replacement procedures
4-20).
Spare part number
538340-001
4–27