Buzzer Tones - Miele G 6060 Operating Instructions Manual

Programme options

Buzzer tones

A sequence of audible tones will sound
at the end of the programme or if there
is a fault.
The buzzer at the end of a programme
and the warning buzzer in the event of a
fault will sound 4 times at intervals with
a short pause between each set.
The buzzer tones are activated ex-
works.
You can deactivate the buzzer that
sounds at the end of a programme if
you wish. The warning buzzer for faults
cannot be deactivated.
 Open the door.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the programme selector button
 in, and whilst holding it in switch
the dishwasher on using the  but-
ton.
Keep the programme selector button
 pressed in for at least four seconds
until the lower right hand programme
indicator comes on.
If this does not happen, start the pro-
cedure from the beginning again.
52
 Press the  button four times.
The  indicator will flash rapidly four
times at intervals.
The flashing sequence in the display
shows whether the buzzer at the end of
the programme is activated or deactiv-
ated.
–  : Buzzer tones activated
–  : Buzzer tones deactivated
 Press the programme selector button
 to change the setting.
The setting is now stored in memory.
 Switch the dishwasher off with the 
button.