Buzzer Tones - Miele G 6160 Operating Instructions Manual

Buzzer tones

A sequence of audible tones will sound
at the end of the program or if there is a
fault.
The buzzer at the end of a program and
the warning buzzer in the event of a
fault will sound 4 times at intervals with
a short pause between each set.
The buzzer tones are activated at the
factory.
You can deactivate the buzzer that
sounds at the end of a program if you
wish. The warning buzzer for faults can‐
not be deactivated.
 Open the door.
 Turn the dishwasher off with the 
button, if it is turned on.
 Press the program selection button
, and, simultaneously switch the
dishwasher on using the  button.
Keep the program selection button 
pressed in for at least four seconds
until the lower right program indicator
light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
 Press the  button 4 times.
The  indicator light will flash 4 times
at short intervals.
The flashing sequence in the time dis‐
play shows whether the buzzers at the
end of the program are activated or de‐
activated.
–  : Buzzer tones activated
–  : Buzzer tones deactivated
 Press the program selection button 
to change the setting.
The setting is now stored in memory.
 Turn the dishwasher off with the 
button.
Options
49