Autoopen - Miele G 6060 Operating Instructions Manual

AutoOpen

In some programmes the door automat-
ically opens slightly to assist the drying
process.
This function can be deactivated if you
wish.
 Open the door.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the programme selector but-
ton  in and, whilst holding it in,
switch the dishwasher on using the
 button.
Keep the programme selector but-
ton  pressed in for at least four
seconds until the bottom right indic-
ator light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Programme options
 Press the  button seven times.
The  indicator will flash rapidly seven
times at intervals.
The flashing sequence in the display in-
dicates whether the "AutoOpen" func-
tion is activated or not.
–  : "AutoOpen" activated
–  : "AutoOpen" deactivated
 Press the programme selector button
 to change the setting.
The setting is now stored in memory.
 Switch the dishwasher off with the
 button.

If you have deactivated the auto-
matic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully. Otherwise steam from the dish-
washer could damage the edge of
the worktop because the fan is no
longer running.
55