Buzzer Tones - Miele G 4960 Operating Instructions Manual

Programme options

Buzzer tones

A sequence of audible tones will sound
at the end of the programme or if there
is a fault.
The buzzer at the end of a programme
and the warning buzzer in the event of a
fault will sound 4 times at intervals with
a short pause between each set.
The buzzer tones are activated ex-
works.
You can deactivate the buzzer that
sounds at the end of a programme if
you wish. The warning buzzer for faults
cannot be deactivated.
 Open the door.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the programme selector button
 in and, whilst holding it in, switch
the dishwasher on using the  but‐
ton.
Keep the programme selector button
 pressed in for at least 4 seconds
until the lower right-hand programme
indicator comes on.
If this does not happen, start the proce‐
dure from the beginning again.
60
 Press the  button 4 times.
The  indicator will flash rapidly 4
times at intervals.
The flashing sequence in the display
shows whether the buzzer at the end of
the programme is activated or deactiva‐
ted.
–  : Buzzer tones are switched on.
–  : Buzzer tones are switched off.
 Press the programme selector button
 if you wish to change the setting.
The setting is now stored in memory.
 Switch the dishwasher off with the 
button.