Adjust Automatic
You can adjust the Automatic pro-
gramme so that it will remove stubborn
soiling from a lightly soiled load. This
will increase energy usage.
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the programme selector button
in, and whilst holding it in switch
the dishwasher on using the but-
ton.
Keep the programme selector button
pressed in for at least four seconds
until the lower right hand programme
indicator comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Programme options
Press the button five times.
The indicator will flash rapidly five
times at intervals.
The flashing sequence in the display in-
dicates whether Adjust Automatic is ac-
tivated or not.
– : "Adjust Automatic" activated
– : "Adjust Automatic" deactivated
Press the programme selector button
to change the setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
53