Contents 1. Caution 2. Main Features 3. Controls & Functions 4. Menu Tree & Adjustment 5. Menu Operations [1] PICTURE [2] VIDEO [3] COLOR [4] DISPLAY [5] GPI [6] MARKER [7] AUDIO [8] SYSTEM [9] INFO. 6. Firmware Upgrade & Color Calibration 7.
1. Caution 1. Caution Always use set voltage. • Do not attempt to service the product • When mounting the product on a wall or • When relocating the product placed on a ● AC 100 ~ 240V (1.6A/50~60Hz) yourself. Removing covers can expose ceiling, be sure to install the product cart, it must be moved with the utmost ●...
POWER UMD feature support ● - This product supports protocols provided by TVLogic or TSL protocol. POWER SWM-170A : REAR / LEFT Ethernet & USB support ● - Supports Ethernet and USB connection for program download and monitor control.
Page 5
3. Controls & Functions 3. Controls & Functions SWM-240A : FRONT / RIGHT SWM-320A : FRONT / RIGHT TALLY TALLY TALLY TALLY MENU DOWN ENTER MENU DOWN ENTER MENU DOWN ENTER POWER POWER POWER SWM-240A : REAR / LEFT SWM-320A : REAR POWER HDMI HDMI...
Page 6
- This terminal is used to upgrade the firmware [SDI-B IN] (BNC) ● [UP] Button or color calibration made by TVLogic. - HD/SD SDI signal input terminal for SDI B. ● - Used to move up through the menus during...
4. Menu Tree & Adjustment 4. Menu Tree & Adjustment [1] Menu Construction [3] Menu Control Sequence [5] Menu Tree The product may be controlled and set 1. Press MENU button to activate the OSD ● BRIGHT HD DISPLAY MODE menu on the screen.
4. Menu Tree & Adjustment 5. Menu Operations [5] Menu Tree [1] PICTURE USER ASPECT HORIZONTAL SDI A SWM-170A 1080/60i USER CONFIG SET ● MARKER - Used to set the aspect ratio of HORIZONTAL BRIGHT SERIAL NUMBER value. MARKER DISPLAY CONTRAST CHROMA - Control Range:...
5. Menu Operations 5. Menu Operations [3] COLOR [2] VIDEO SDI SAMPLING BIAS RED SDI A SWM-170A 1080/60i SDI A SWM-170A 1080/60i ● ● - Used to select input SDI sampling mode in - Used to set Red Bias(or Offset, mainly affects DITHERING COLOR TEMP 6500K...
5. Menu Operations 5. Menu Operations [4] DISPLAY [5] GPI SDI A SWM-170A 1080/60i SDI A SWM-170A 1080/60i SDI A SWM-170A 1080/60i Menu PAGE I >> PAGE II PAGE II >> PAGE I PAGE I >> PAGE II Classifi- Settable Values HD DIPLAY MODE 16:9 H/V DELAY...
Page 11
* Transmission (18 Byte) (PC or Device -> Monitor) D-UMD TALLY TYPE DEFAULT - Configuration values are DEFAULT and USER TALLY 1 COLOR COLOR. TALLY 2 COLOR * DEFAULT : Existing TVLogic operating TALLY 3 COLOR HEADER CONTROL DISPLAY DATA TALLY 4 COLOR system (VRT) (1 BYTE)
Page 12
5. Menu Operations 5. Menu Operations [5] GPI [5] GPI Tally Type - Default ● <Dynamic UMD Protocol (TSL V3.1)> - S-8C(Single 8 Character) & S-16C(Single 16 Character) * Transmission (Ethernet) (Maximum packet length 2048 Byte) (PC or Device or Monitor) Bit 1 Bit 1 Operation...
Page 13
5. Menu Operations 5. Menu Operations [5] GPI [5] GPI TSL V5.0 D-UMD TALLY TPYE – USER COLOR SDI A SWM-170A 1080/60i SDI A SWM-170A 1080/60i ● PAGE III >> PAGE IV PAGE IV >> PAGE I - Color selections between TALLY1 ~ TALLY2. DHCP UMD CHARACTER CHANNEL1...
5. Menu Operations 5. Menu Operations [6] MARKER [6] MARKER FIT MARKER SDI A SWM-170A 1080/60i SDI A SWM-170A 1080/60i ● - Used to activate the FIT MARKER function. PAGE I >> PAGE II PAGE II >> PAGE I - With FIT MARKER “ON”, the safety area is MARKER USER MARKER H1 MARKER DISPLAY...
5. Menu Operations 5. Menu Operations [8] AUDIO [9] SYSTEM LEVEL METER POSITION INTERNAL PATTERN SDI A SWM-170A 1080/60i SDI A SWM-170A 1080/60i ● ● - Used to control the position of the Audio - This item generates internal white pattern. LEVEL METER SELECT PAGE I >>...
5. Menu Operations 5. Menu Operations [9] SYSTEM [9] SYSTEM [10] INFO. SDI A SWM-170A 1080/60i SDI A SWM-170A 1080/60i SDI A SWM-170A 1080/60i SDI A SWM-170A 1080/60i PAGE II >> PAGE III PAGE III >> PAGE VI PAGE VI >> PAGE I BOARD VERSION 0001 01 0.01 9 KEY LED DEVICE...
6. Firmware Upgrade & Color Calibration 7. Button Functions When the FUNCTION button is set to [1] Firmware Upgrade [2] Color Calibration [1] MENU Button ● ASPECT 1. Four different aspect modes are available. When the input signal is SDI -A/B, SDI A SWM-170A 1080/60i...
8. Other Functions 9. DVI Support Resolution [1] ASPECT [2] SCAN DVI DIGITAL/HDMI Support Resolution (SWM-170A/320A/420/460/550/) 1. Four different aspect modes are available. This product supports various scan modes. DVI DIGITAL Graphic mode supports the following modes : ● ● When input signal is SDI -A/B, Composite Press the F1/UP and F2/DOWN buttons to ●...
10. Product Specifications 9. DVI Support Resolution DVI DIGITAL/HDMI Support Resolution (SWM-240A) SWM-170A Size 17” DVI DIGITAL Graphic mode supports the following modes : Resolution 1920 X 1080 (16:9) ● Pixel Pitch 0.199(H) X 0.199(W) mm Color Depth 16.7M (True 8bit) Resolution Frequency Viewing Angle...
Page 20
10. Product Specifications 10. Product Specifications SWM-240A SWM-320A Size 24.1” Size 31.55” Resolution 1920 X 1200 (16:10) Resolution 1920 X 1080 (16:9) Pixel Pitch 0.270(H) X 0.270(W) mm Pixel Pitch 0.364(H) X 0.364(W) mm Color Depth 16.7M (Dithered 8bit) Color Depth 1.07B (10bit) Viewing Angle R/L, U/D 178degrees...
Page 21
10. Product Specifications 10. Product Specifications SWM-420A SWM-460A Size 42” Size 46” Resolution 1920 X 1080 (16:9) Resolution 1920 X 1080 (16:9) Pixel Pitch 0.485(H) X 0.485(W) mm Pixel Pitch 0.530(H) X 0.530(W) mm Color Depth 1.06B (R,G,B 10bit, Dither) Color Depth 1.06B (R,G,B 10bit, Dither) Viewing Angle...
Page 22
10. Product Specifications SWM-550A Size 55” Resolution 1920 X 1080 (16:9) Pixel Pitch 0.21(H) X 0.63(W) mm Color Depth 1.06B (R,G,B 10bit, Dither) Viewing Angle R/L, U/D 178degrees Luminance of white 450 cd/ m Contrast Ratio 4000 : 1 Display Area 1209.6( H) X 680.4(V) mm 1 X DVI-I DVI IN...
Page 23
FOR MORE INFORMATION PLEASE VISIT : http://www.tvlogic.tv 12F, ACE HIGH-END 8, 84 Gasan digital 1-ro, Geumcheon-gu, Seoul, 153-802, KOREA 부사장 TEL : +82-70-8668-6611, FAX : 82-2-6123-3201, E-mail : sales@ t vlogic.co.kr 조 성 일 153-802 서울특별시 금천구 가산동 345-4 에이스하이엔드 8차 12층...
Need help?
Do you have a question about the SWM Series and is the answer not in the manual?
Questions and answers