Table of Contents
Advertisement
4. Press the [▲] or [▼] key to select the desired key
function, then press the [ENTER] soft key.
Refer to the next page for available functions.
5. Repeat steps 3 and 4 to assign up to 6 functions.
6. To exit this MENU and return to radio operation press the [BACK] soft key.
Available functions are:
DISPLAY
NONE
WX/CH
SCAN
SCAN MEMORY
DW/TW
PRESET
TX HI/LO
Selecting How Long the Soft Keys are Shown
[
] "SETUP" "CONFIGURATION" "SOFT KEY"
1.
2. Press the [▲] or [▼] key to select "KEY TIMER",
then press the [SELECT] soft key.
3. P ress the [▲] or [▼] key to select how long the
soft key icon will be shown on the display after a
soft key is pressed, then press the [ENTER] soft
key.
4. The showing time can be set to "3 sec", "5 sec",
"7 sec", "10 sec", or "15 sec".
5. To exit this MENU and return to radio operation press the [BACK] soft key.
SOFT KEY ICON
−
Switches channels between
weather and marine
Turns the scanning function
ON or OFF
Add or remove channels
from memory channel scan
Starts and stops dual watch
or triple watch scan
Programs or deletes the pre-
set memory channel
Selects transmit power
FUNCTION
−
KEY SELECTION
NONE
WX/CH
SCAN
DW/TW
BACK
ENTER
SOFT KEY NUMBERS
ASSIGNED AS DEFAULT
(See the previous page.)
−
01
(GX1400GPS, GX1400)
05
04
06
10
(GX1400GPS, GX1400)
01
(GX1400GPS/E)
02
SOFT KEY
KEY ASSIGNMENT
KEY TIMER
BACK
SELECT
KEY TIMER
3 sec
5 sec
7 sec
10 sec
BACK
ENTER
75
Advertisement
Table of Contents
