Standard Horizon ECLIPSE GPS GX1400GPS/E Owner's Manual page 38

Hide thumbs Also See for ECLIPSE GPS GX1400GPS/E:
Table of Contents

Advertisement

Pausing a Distress Alert
After a distress alert is transmitted, the distress alert is repeated every 4 minutes
until the call is canceled by the user or until the radio is turned off and on again.
The transceiver has provision to suspend (pause) the re-transmitting of the
distress call by the procedure below.
1. After the distress call is transmitted, the radio will
show the display as on the right.
Looking at this display you will notice "TX IN:
02:25", this is the time when the radio will re-trans-
mit the distress call.
2. To suspend re-transmitting the distress call, press
the [PAUSE] soft key.
3. To resume counting down to transmit the distress
call, press the [RESUME] soft key.
Canceling a DSC Distress Alert
If a distress alert was sent by error the transceiver allows you to send a message
to other vessels to cancel the distress alert that was made.
1. Press the [CANCEL] soft key, then press the
[YES] soft key.
2. After the message for cancelling has been trans-
mitted, press the [OK] soft key.
3. Press the [FINISH] soft key.
4. Press the [QUIT] soft key to return to radio opera-
tion.
36
!!DISTRESS!!
UNDESIGNATED
[Waiting for ACK]
TX IN: 02:25
PAUSE
CANCEL
INFO
!!DISTRESS!!
UNDESIGNATED
Retransmission
is now pausing!
TX IN: 02:25
RESUME
CANCEL
INFO
!!DISTRESS!!
UNDESIGNATED
Do you want to
cancel a DIST?
YES
!!DISTRESS!!
UNDESIGNATED
DIST CANCEL
[
Transmitted
YES
OK
!!DISTRESS!!
UNDESIGNATED
ALL SHIPS
(3 TIMES)
THIS IS VESSEL
AGAIN
OK
FINISH
!!DISTRESS!!
UNDESIGNATED
DIST CANCEL
[
Completed
AGAIN
OK
QUIT
NO
]
NO
]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eclipse gps gx1400gpsEclipse gx1400Eclipse gx1400b

Table of Contents