Table of Contents
Advertisement
The transceiver has the capability to turn off the individual call ringer.
[
] "SETUP" "DSC SETUP" "DSC BEEP"
1.
2. Select "DSC BEEP" with the [▲] or [▼] key, then
press the [SELECT] soft key.
3. Select "INDIVIDUAL" with the [▲] or [▼] key,
then press the [SELECT] soft key.
4. Press the [▲] or [▼] key to select "OFF", then
press the [ENTER] soft key.
5. Press the [16/S] key or press the [CLR] soft key to return to radio opera-
tion mode.
If you wish to return to enabling the ringer tone, just repeat the above procedure,
pressing the [▲] or [▼] key to select "ON" in step 4 above.
10.5 GROUP CALL
This feature allows users to automatically contact a specific group of vessels
using DSC radios with the group call function. The called radios can automati-
cally switch to the desired channel for voice communications. This function is
very useful for yacht clubs and vessels traveling together that want to make
communal announcements on a predetermined channel. Up to 30 group MMSIs
may be programmed.
10.5.1 Setting up a Group Call
For this function to operate the same group MMSI must be programmed into all
the DSC VHF radios within the group of vessels that will be using this feature.
To understand about group MMSI programming, first a Ship MMSI has to be
understood.
Ship MMSI: The first three digits called a MID (Mobile Identity Group) of a ship
MMSI denote the country the ship registered for a MMSI. The last 6 digits are
specific to the ships ID.
Ship MMSI Example: If your MMSI is "366123456", "366" is MID which denote
the country and "123456" is the vessel's MMSI.
46
DSC SETUP
AUTO CH CHANGE
AUTO ACTION TIMER
POS UNFIX WAIT
DSC BEEP
BACK
SELECT
DSC BEEP
INDIVIDUAL
ON
ALL SHIPS
ON
GROUP
ON
POS REQUEST
OFF
BACK
SELECT
INDIVIDUAL
OFF
ON
BACK
ENTER
Advertisement
Table of Contents
