11.2.2 Weather Alert (USA version only)
This selection is used to enable or disable the NOAA Weather Alert function.
[
] "SETUP" "CHANNEL SETUP" "WEATHER ALERT"
1.
2. Press the [▲] or [▼] key to select "ON" or "OFF".
3. Press the [ENTER] soft key to store the selected
setting.
4. Press the [CLR] key to return to radio operation.
11.2.3 Multi Watch
Allows selection of the dual and triple watch functions.
Refer to section "9.9 MULTI WATCH (TO PRIORITY CHANNEL)" for details.
11.2.4 Scan Memory
To be able to scan channels the radio must be programmed. This section allows
channels to be stored in scan memory.
Refer to section "9.10.2 Programming Scan Memory" for details.
11.2.5 Scan Type
This selection is used to select the scan mode between "MEMORY SCAN"
and "PRIORITY SCAN".
Refer to section "9.10.1 Selecting the Scan Type" for details.
11.2.6 Scan Resume
This selection is used to select the time the transceiver waits after a transmis-
sion ends before the radio start to scan channels again.
[
] "SETUP" "CHANNEL SETUP" "SCAN RESUME"
1.
2. Press the [▲] or [▼] key to select the desired
resume time.
3. Press the [ENTER] soft key to store the selected
setting.
4. Press the [CLR] key to return to radio operation.
68
WEATHER ALERT
OFF
ON
BACK
ENTER
SCAN RESUME
1 sec
2 sec
3 sec
4 sec
BACK
ENTER